AISI
英
美
网络 美国钢铁协会; 钢号; 美国钢铁学会标准; 钢铁协会; 美国钢铁协会标准
双语例句
- All other metal seal components of both inner and outer seals shall be aISI 316 stainless steel.
所有内置和外置密封的金属部件都应该是符合美国钢铁协会的316不锈钢。 - Influence of plasma carburizing temperature on microstructure and properties of carburized layer for AISI 316L stainless steel
离子渗碳温度对316L不锈钢渗层组织和性能的影响 - Nano-structured Films Formed on AISI 329 Stainless Steel Using Nd-YAG Pulsed Laser
应用Nd-YAG脉冲激光AISI329不锈钢表面制备纳米薄膜 - Aisi direct steelmaking project and its progress
美国钢铁协会直接炼钢课题及进展情况 - The AISI is not only focused on China.
美国钢铁协会关注的焦点不只是中国。 - When we look at surging imports from China and other countries with a history of market-distorting trade practices, it's clear our trade laws are in urgent need of strengthening, said Andrew Sharkey, chief executive officer of the AISI.
美国钢铁协会主席夏基（AndrewSharkey）表示：中国和其他一些国家在历史上有过贸易行为导致市场扭曲的记录，看到来自这些国家的进口不断飙升，我们应当清楚，我们迫切需要加强贸易法。 - Study on the Surface Oxidation Phenomenon of the AISI 304 Stainless Steel by Nd: YAG Pulsed Laser Melting
Nd：YAG脉冲激光熔凝AISI304不锈钢表面氧化现象的研究 - Surface Nano-crystallization was carried out on AISI 304 stainless steel by surface mechanical attrition treatment. XRD, microhardness, tensile test, SEM and electrochemical corrosion test were used to analyse microstructure and properties of the treated steel.
利用表面机械研磨的方法实现了304不锈钢表面纳米化，采用XRD、显微硬度、拉伸实验、SEM和电化学腐蚀分析了材料的组织和性能。 - The Properties and Applications of Chinese-Made AISI 403 Blade Steel
国产AISI403叶片钢的性能与应用 - With analysis of physical meaning of Walker's unified viscoplastic constitutive model parameters, an parameter fitting method for viscoplastic constitutive models was established. The method was validated using material AISI 316L as an example.
通过对Walker模型中各参数物理意义的分析，初步建立了工程用粘塑性模型的参数拟合方法，并以AISI316L材料为例，初步验证了该方法的可行性。 - Study on Submerged Arc Welding of AISI 304
AISI304钢埋弧焊工艺的研究 - Microstructures of the AISI 316 Steel Annealed Under Different Conditions
AISI316钢在不同退火条件下的微观组织结构 - In situ observation of nucleation and growth of high-temperature δ phase in stainless steel AISI 304 during heating
AISI304不锈钢加热过程中高温δ相形核与生长的原位观察 - The copperizing layer with excellent antibacterial property was obtained by chemical copperizing using CuO+ NH_4Cl as copperizing agent on the surface of AISI 304 stainless steel.
以CuO+NH4Cl为渗剂对AISI304不锈钢表面进行化学渗铜处理，获得了具有优良抗菌性能的渗铜层。 - Microstructure and Antibacterial Property of AISI 304 Stainless Steel After Chemical Copperizing Treatment
AISI304不锈钢渗铜后的微观组织及抗菌性能 - A substitute for AISI 410 steel& its toughness control
AISI410钢的代用品及其强韧性控制 - The manufacturing technological process of AISI 422 steel sector plate blank has been described.
介绍了AISI422钢扇型板毛坯的制造工艺流程。 - The distribution of the dislocations of AISI 304 stainless steels drawn at-70? ℃ with different degrees of deformation was observed by transmission electron microscope ( TEM), which was used to study the relations between cold working and dislocation density.
将AISI304不锈钢在低温（液氮，-70℃）条件下进行不同程度拉伸，采用透射电镜观测位错分布，研究了冷加工与位错密度的关系。 - The mutual influence between deformation and anodic dissolution of AISI 321 austenitic stainless steel in an acidic chloride solution was studied.
研究了形变对奥氏体不锈钢在酸性氯离子溶液中阳极溶解的加速作用以及阳极溶解对力学行为的影响。 - The Effect of Consolidation Condition on the Structure and Mechanical Properties of AISI 304 Powder Material
固化条件对AISI304不锈钢粉末固化材的显微组织和力学性能的影响 - Effects of environment on the overload behavior of fatigue crack propagation for AISI 321 stainless steel
环境对AISI321不锈钢疲劳裂纹扩展过载效应的影响 - The depth of pitting occured in AISI 308 stainless steels is measured by using the modified XJ 16 metalloscope.
利用自行改装的XJ－16型金相显微镜测量了核承压设备堆焊层AISI308不锈钢材料的蚀坑深度。 - By means of X-ray diffraction technique, the effects of C 、 Mn 、 Cr and Ni on the tensile properties and the tendency of strain-induced martensite transformation in AISI 304 stainless steel have been investigated.
借助于X射线衍射，研究了C、Mn、Cr和Ni含量对304奥氏体不锈钢拉伸力学性能和应变诱发马氏体相变倾向的影响。 - The friction and wear performance of AISI H13/ cemented carbide are studied. The worn surface morphology of cemented carbide is inerratic, and the attrition wear, adhesion wear and oxidative wear are found in the cemented carbide surface.
研究了AISIH13/硬质合金刀具材料的滑动摩擦磨损行为，硬质合金磨损区域形貌比较规则，摩擦过程中硬质合金发生了磨粒磨损，粘结磨损和氧化磨损。 - AISI 440C stainless steel is considered as martensitic stainless steel, which is characterized with high carbon content, strength, hardness and wear resistance but poor in machinability.
AISI440C不锈钢是一种高碳马氏体不锈钢，其含碳量高，强度、硬度和耐磨性高，切削加工性能差。