gears

英 [ɡɪəz] 美 [ɡɪrz]

n.  排挡; 齿轮; 传动装置; 挡; (某种活动的)设备，用具，衣服
v.  换挡; （使）搭配; （使）适合; 使兴奋起来; 使准备好
gear的第三人称单数和复数

柯林斯词典

  1. N-COUNT 齿轮；传动装置；变速器
    The gears on a machine or vehicle are a device for changing the rate at which energy is changed into motion.
    1. On hills, he must use low gears...
      在山上,他必须挂低速挡。
    2. The car was in fourth gear...
      车挂的是四挡。
    3. He put the truck in gear and drove on.
      他把卡车挂上挡，继续往前开。
  2. N-UNCOUNT （某一特定活动的）设备，服装
    The gear involved in a particular activity is the equipment or special clothing that you use.
    1. About 100 officers in riot gear were needed to break up the fight.
      大约需要100名穿防暴服的警察前来制止这场斗殴。
    2. ...fishing gear...
      钓具
    3. They helped us put our gear back into the van.
      他们帮我们把装备放回到小货车里。
  3. N-UNCOUNT 服装
    Gear means clothing.
    1. I used to wear trendy gear but it just looked ridiculous.
      我以前常穿新潮的衣服，但看上去却滑稽可笑。
  4. N-UNCOUNT 毒品；（尤指）***
    Some people refer to illegal drugs, especially heroin, as gear .
    1. Are these people using gear and amphetamines at the same time?
      这些人同时服用***和***吗？
  5. V-PASSIVE 使为…而准备；使为了达到…而作好准备
    If someone or something is geared to or towards a particular purpose, they are organized or designed in order to achieve that purpose.
    1. Colleges are not always geared to the needs of mature students...
      大学有时满足不了成人学生的需求。
    2. My training was geared towards winning gold in Munich.
      我为了在慕尼黑夺取金牌而进行训练。
点击展开全文

双语例句

  1. He looked up into the mirror as he changed through his gears.
    他一边换挡，一边抬眼看后视镜。
  2. Peter drove jerkily, cornering too fast and fumbling the gears.
    彼得转弯太急，换挡不利索，车开得一颠一颠的。
  3. On hills, he must use low gears
    在山上，他必须挂低速挡。
  4. Defective and worn gears, bearings and spindles.
    齿轮、传动装置和锭子破损。
  5. Bevel Gears are the most versatile in that they have good efficiency.
    斜面齿轮执行机构具有最广泛的用途和良好的操作效率。
  6. This paper presents a new method to measure tooth error of small module gears.
    进行测量，提出了一种在视觉三坐标测量机上测量小模数齿轮齿形误差的新方法。
  7. The effect of the initial pressure on the performance of draft gears and its importance are expounded.
    阐述了初压力对缓冲器性能的影响和其重要性，并对几种典型车钩缓冲器的初压力状况进行了分析。
  8. Effect of superfine Ni powder addition on the sintering process and final properties of driven gears was studied.
    研究了经超细化处理的镍粉对从动齿轮烧结工艺和性能的影响。
  9. Main gears are machined by gear grinding, the machine ensuring high precision and low noise.
    主要齿轮磨削加工齿轮的，机器保证精度高，噪音低。
  10. Contact characteristics of the tooth surfaces of spherical gears are investigated.
    对球齿轮齿廓进行了接触特性研究。
  11. Certainly it will be very useful to improve spiral bevel and hypoid gears industry in our country.
    这对提高我国弧齿锥齿轮和准双曲面齿轮润滑设计与应用水平有重要价值。
  12. The basic principle for the geometrical design of hypoid gears is introduced.
    介绍了准双曲面齿轮几何设计的基本原理。
  13. Introduces the rationale and techniques of common normal length measurement in the test and mapping of parameters for gears.
    介绍了齿轮精度检测和齿轮参数测绘中用公法线长度测量的基本原理和基本方法。
  14. A few of their later designs have frames and gears that are made out of plastic.
    有几个他们后来的设计框架和齿轮的制造的塑料。
  15. The vehicle has9 forward and1 reverse gears, with mechanical gear box, power assisted steering and independent suspensions.
    车辆有9个前进档和1个后退档，使用机械式齿轮箱、助力转向和独立悬挂。
  16. Other gears connect the steering wheel to the front wheels.
    汽车的其他齿轮连接方向盘和前轮。
  17. This paper introduces a optimization method of pinion cutter for cutting helical gears.
    介绍一种斜齿插齿刀的刃形优化方法。
  18. Use proper equipment and gears.
    请使用适当的装备和器具。
  19. Most cars have three forward gears and a reverse.
    大多数汽车有三个前进挡和一个倒退挡。
  20. Shafts are mounted in bearings and transmit power through such devices as gears, pulleys, cams and clutches.
    轴安装在轴承中，通过齿轮、皮带轮、凸轮和离合器等零件传递动力。
  21. There is a right way and a wrong way to shift gears with an automatic transmission.
    有一个正确的方式和错误的方式改变一个自动变速器齿轮。
  22. There are at least three sets of gears in most passenger cars, even more in jeeps and trucks.
    在轿车中至少有三套齿轮，吉普车和货车的齿轮就更多了。
  23. When gears are to be used to transmit motion between intersecting shaft, some of bevel gear is required.
    轴角。当齿轮是用来传递运动之间的交叉轴，其中有些圆锥齿轮的需要。
  24. Spur gears and helical gears.
    直齿轮和螺旋齿轮。
  25. The camshaft and crankshaft gears can be connected directly, or meshed.
    凸轮轴和曲轴齿轮可能被直接连结，或者相啮合。
  26. Bevel gears are useful when the direction of a shaft's rotation needs to be changed.
    当两传动轴旋转时需改变方向时，采用锥齿轮是一种十分有用的方法。
  27. ADVANTAGE-The mechanism solves the problem of slipping friction between planet gears and planet gear shafts.
    优点–该机构解决了行星齿轮与行星齿轮轴之间的滑动摩擦问题。
  28. The gears in transmission go to work by connecting the moving parts of the engine to the wheel.
    变速装置中的齿轮把发动机的转动部分和车轮连接起来。
  29. The effect of measurement cylinders diameters on the measuring result of the gears M Value is analysed.
    分析了圆柱直径的大小对齿轮M值测量结果的影响。
  30. The gears have stuck.
    那些齿轮已经卡住了。
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类