puller

1. Your typical purchaser on the weekends is going to be more price sensitive, and airlines might realize that and lower their fares, Puller told the station.
   普勒告诉电台的记者说：喜欢在周末购买机票的人对价格更加敏感，航空公司也许意识到了这一点，特意调低了票价。
2. Use a universal puller to separate the ball stud from the frame rail bracket.
   用万能拉出器将圆头螺栓从车架横梁支架上拆下。
3. Remove intake socket with the internal puller.
   用内部拉具拆下进水管座。
4. Destroy the plastic sleeve before fitting the puller.
   伸入拉具之前先破坏塑料套管。
5. Fixed mould puller pins, stop drag-bars and nylon shutters were used to open the mould sequentially.
   并用前模拉料销、限位拉杆和尼龙开闭器控制开模运动顺序，实现了浇注凝料的自动脱模。
6. Pull off Cardan flange with three-arm puller.
   使用三臂拉具拉出万向节法兰。
7. Insert wire puller with the flexible end on the right side into the rubber sleeve.
   将拉线器（其右侧为挠性端）插入橡胶套。
8. Insert internal puller internal puller into the differential cover.
   将内部拉具内部拉具插入差速器盖。
9. Hold the puller tightly with the other hand while doing so.
   进行上述操作时请用另一只手紧紧握住拉具。
10. Double puller, skip stitch device and automatic cutter result in a uniform quality finish.
    双拉，跳针装置和自动在一个统一的质量完成刀具的结果。
11. In addition, each groove shape opening of the utility model is a pressing part, so the structure of the nail puller is simple with low costs.
    另外，本实用新型的起钉器每一个槽形口为一个冲压件，故结构较为简单，成本低。
12. Technology of manufacturing linear motor type puller
    直线电动机式牵引机制造技术
13. The utility model discloses a nail puller, which provides a nail puller of simple structure, convenient taken-with and utilization which can pull nail and clean the remained nail.
    本实用新型公开了一种拔钉器，目的是提供一种在拔钉的同时又可清除残钉，结构简单，方便携带和使用的拔钉书钉器。
14. To do this, the special tool relay puller can be used.
    为此，可以使用专用工具继电器拉具。
15. Remove the special gear puller and adapter tools from timing gear cover.
    从正时齿轮罩上拆卸专用齿轮拉拔器及接头工具。
16. A nail puller is fixedly connected on the base.
    在底座上固定连接有起钉器。
17. Pull valve usingrelay puller if necessary.
    如有必要，使用继电器拉具拉动阀门。
18. While the structure of hydraulic puller makes it possible to work vertically and the distance among various flexible arms can be adjusted so the application area of pullers is enlarged.
    而液压式拔卸器的结构决定了它可以垂直用力，软力臂相互间的距离也可以进行调节，扩大了拔卸器原有的工作范围。
19. To do this, insert internal puller into the opening and tighten.
    为此，将内部拉具插入到开口中并拧紧。
20. Secondly there is a relative angle between a traditional puller and workpieces so the puller can't work vertically, which limit its application field.
    其次，传统的拔卸器和轴承工件之间有一个相对角度，因此不能垂直用力，工作范围受限。
21. Lockstitch cylinder bed with a synchronous puller behind the needle, which continuously operates up and down.
    锁式线迹悬臂，机针背后同步连续输送上、下拖辘。
22. We use homemade bolt puller to preload the clamp bolt, which more accurately controls the preload of the clamp bolt, and ensures the clamp's holding effect on the main cable.
    采用自制螺栓拉拔器对索夹螺栓进行预紧，更加精确地控制了索夹螺栓的预紧力，确保索夹对主缆的握紧效果。
23. Remove spacer ring and timing gear with a conventional puller.
    用常规拉具拆卸隔环和正时齿轮。
24. In a small alley, a dog, unaccustomed to a long-gowned puller, nipped at his heels.
    进了小胡同，一条狗大概看穿长衣拉车的不甚顺眼，跟着他咬。
25. Puller, a tool used to unload the bearings set in the bearing bore, can unload bearings and workpieces mounted on the shaft.
    拔卸器，这是一种对设置于机具内孔处的轴承进行取卸用的工具，可卸下镶在轴上的轴承或工件。
26. Remove bearing cover using special tool puller.
    使用专用工具拉具拆下轴承盖。
27. In view of taking down the hinge pin of hydraulic support, developed the pneumatic puller on the basis of usual hammer puller, pneumatic wrench and screw pair drive.
    针对液压支架铰接销拆卸难的问题，在普通锤式助拔器的基础上，利用风动扳手和螺旋副传动，研制了风动助拔器。
28. OEM different kinds of letter opener, multi-function letter opener, such as letter opener with mirror, letter opener with ruler and clip, letter opener with nail puller, your logo is welcome.
    OEM的分化和各种开信刀，多功能开信，如开信刀镜，开信统治者和剪辑，开信刀钉拉拔，你的标志，是值得欢迎的。

noun

1. someone who pulls or tugs or drags in an effort to move something

   Synonym:    tuggerdragger

2. someone who applies force so as to cause motion toward herself or himself