Discussion on the Spallation Behavior Resolved by Free-Surface Velocity Profile 关于自由面速度剖面解读层裂问题的几点商榷
Spallation Behavior of Thermally Grown Oxide Ceramic Film under Compressive Stresses 热生长陶瓷薄膜在压应力作用下的脱落行为
The phenomenon of spallation in the free surface of the concrete under tensile stress wave was explained. 解释了混凝土自由面在拉应力波作用下的层裂现象。
Comparing with the temperature in the heavy ion collisions, the temperature in the intermediate energy spallation reaction is lower when the incident energy is not very high. 与重离子碰撞相比,散裂反应在入射能量不太高的情况下反应过程的温度比较。
Particle swarm optimization based on immunity spallation operator 基于免疫分裂算子的粒子群优化算法
Phase transition and abnormal spallation in pure iron AN INVERSE TECHNIQUE TO CALCULATE THE ELASTIC PROPERTIES OF INTERPHASE OF CEMENT MORTAR 水泥砂浆界面相弹性常数的反演计算
That is very significative for the applications of the spallation reactions. 这对散裂反应的实际应用非常有意义。
Simulation for Spallation Damage of Armor Target Impacted by Fragment Using MCA 破片撞击下装甲钢层裂破坏的二维MCA方法模拟
No spallation of the deposited layer from the ceramic substrate is observed under loading of 100N. 在100N的最大载荷下,渗镀层与陶瓷基体未发生剥离和崩落现象。
The methods to control residual stress and reduce the fracture and spallation are discussed. 并对如何控制残余应力,减少烤瓷开裂和剥落进行了论述。
The characteristics of neutron scattering, the principle and development of spallation neutron sources, and their advantages in multidisciplinary applications are summarized. 文章简明地介绍了中子散射的特点和它作为物质结构和动态探针的优越性,以及散裂中子源的基本原理、发展状况和多学科的应用优势。
Simulation study on laser-induced spallation in aluminum 强激光使铝靶层裂的模拟实验研究
The spallation target of ADS was studied using DCM/ CEM program. 利用蒙卡程序DCM/CEM对ADS标准散裂中子靶进行了计算。
Conceptual design of target station and neutron scattering spectrometers for the Chinese spallation neutron source 散裂中子源靶站和中子散射谱仪的概念设计
The influence of the orientations of the flake graphites on the spallation of pearlite colony is also discussed. 还讨论了石墨片的空间取向对珠光体团剥落的影响。
Fragment Mass Distribution of Proton-induced Spallation Reaction with Intermediate Energy 中能质子引起散裂反应的碎片质量分布研究
A preliminary design of superconducting section of proton linac for spallation neutron source is made, which includes the design and optimization of the cavity shape and the architecture design of the superconducting section. 对用于散裂中子源的质子直线加速器的超导加速段进行了初步设计,其中,包括加速腔腔形的设计和优化、超导加速段的结构布局。
The criterion of spallation for this material given in this paper is in good agreement with the experimental results. 本文提出的层裂准则与实验结果相当一致。
In this paper, the basic theory and the experimental arrangement of laser spallation technique are introduced. 本文介绍激光层裂法检测复合材料界面拉伸强度的基本原理与实验方法,并从该测量方法的几个关键技术;
In this article spallation criteria and computer modeling of spallation processes are reviewed. 本文首先概述了层裂判据与层裂过程模拟,然后应用S。
The theoretic programs and Monte Carlo codes are a useful approach for solving the physics of spallation neutron source. 相关的理论计算程序和蒙特卡罗方法是研究该系统的散裂靶物理的一个重要手段。
By means of accumulating and dynamic damage criterions, the spallation in the aluminum target is calculated. 并分别利用累计损伤判据和动态断裂准则,计算了铝靶中产生的层裂损伤。
Numerical simulation of spallation in a steel plate due to explosive loading is studied by 2D finite element method. 采用二维有限元方法对爆炸载荷下钢板的层裂问题进行数值模拟计算。
A dynamic growth model of voids and its application to in the study of spallation 延性动态增长模型及其在层裂研究中的应用
It is found that the attenuation of stress wave is important for study of spallation property. 发现在层裂特性研究中,应力波衰减有重要意义。
As the coupling component between accelerator and subcritical core, the spallation target is of crucial importance to the operation safety of the whole system. 作为加速器和次临界堆芯的耦合部件,散裂靶件对系统整体的运行安全起到了至关重要的作用,是ADS系统相关研究最主要的组成部分之一。
ADS is composed by intense-beam proton accelerator, spallation target and subcritical core. ADS系统由强流质子加速器、散裂靶件和次临界堆芯构成。
The secular society, after continuously to the inner detection process inside perfect spallation. 世俗社会的个体,在经过不断地向内心探测的过程中完成了内心的完美蜕变。
The Spallation Neutron Source is a huge scientific research devices and a multi-disciplinary services platform. 散裂中子源是一种大型科研实验装置,是服务多学科的大平台。