start-stop

英 [stɑːt stɒp] 美 [stɑːrt stɑːp]

网络  起动停车; 启动停车系统; 起止; 启动; 启停

计算机



双语例句

  1. It provides all of the necessary application monitors and start-stop scripts to streamline configuration process.
    它提供所有必需的应用程序监视和启动-停止脚本,可以简化配置过程。
  2. Elementary Study of Gasoline Engine Start-Stop Technology in Motor Drive Mode
    电机驱动模式下汽油机直接起停技术初探
  3. Hydraulic lifts the automatic start-stop motor control and emergency manual control;
    升降液压电机的自动启停控制及紧急手动控制;
  4. European start-stop teleprinter network
    欧洲起止式电传机网
  5. Information processing& Start-stop transmission signal quality at DTE/ DCE interfaces
    GB/T14397-1993信息处理DTE/DCE接口处起止式传输的信号质量
  6. DCE/ DTE interface for a start-stop mode data terminal equipment accessing the packet assembly/ disassembly facility ( PAD) in a pubic data network situated in the same country
    起止式数据终端进入本国公用数据网的分组装拆(PAD)设施的DCE/DTE之间的接口
  7. Conclusion The masticatory muscles of miniature pigs are similar with human being in the shape, start-stop point and orientation of muscle force.
    结论小型猪咀嚼肌的形态、起止点、肌力方向都与人类有较大的相似性;
  8. Start-stop and speed control
    起动停止及转速控制
  9. Start-stop System: Effective in Fuel Saving and Emission Reduction
    汽车节油减排的有效措施&启动-停止装置
  10. The paper analyses deeply the start process for start-stop type flying shear and describes the calculation method of flying shear start time and the problems to be considered.
    对启停式飞剪的启动过程进行深入分析,介绍飞剪启动时间的计算方法及应注意的问题。
  11. Normal margin of start-stop apparatus I am going to have it revised and published.
    启闭设备的标准改正力我准备修改一下再出版。
  12. Automatic start-stop control device
    自动起-停控制装置
  13. A New Valid Algorithm to Distinguish the Start-Stop Points of Chinese Speech Signal
    一种新的鉴别汉语语音信号起止点的有效算法
  14. Study on Smoothness of Gasoline Engine Direct Start-Stop Process
    汽油机直接起动停止过程平顺性研究
  15. The start-stop performance of step motor is improved on the basis of movement characteristic in the numerical cutting machine.
    在数控切绘机系统中,对步进电机的控制直接影响到加工质量。
  16. A button type actuating part only needs lightly press the button and the parts do a minimal displacement, and then the entire start-stop action can be finished fast.
    按钮式的起动部分,只需轻按按扭,零件作极小的位移、即可快速完成全部启闭动作。
  17. It is important to improve the security and guide the unit start-stop, changing load etc.
    这对于提高机组安全性、正确指导机组启停、变负荷有重要意义。
  18. It applies colletive and distributive type computer control system ( DCS). The system has metering and adjusting for flow, temperature, interfaces and pressure etc, sequence logic control and motor start-stop control functions.
    其中工艺自控子系统为自控主系统,采用了集散型计算机控制系统(DCS),具有流量、温度、界面、压力等的测量和调节,顺序逻辑控制,电机启停控制功能。
  19. The start-stop flying shear applied to the rod rolling production has adopted Italian flying shear technology.
    应用于棒材生产线的起停式飞剪引进的是意大利杰泰公司的技术。
  20. Operator in driver office can observe operation situation of the whole portal start-stop system through touching screen and it greatly extends operation function of equipment because of using control technology of PLC plus touching screen plus field total line.
    由于采用了PLC+触摸显示屏+现场总线+变频调速等控制技术,使操作人员在司机室通过触摸显示屏能观察到整个门机的运行情况,极大地扩展了设备的运行功能。
  21. A major problem in design of start-stop mechanism is expressed in terms of the relationship between two angular velocity ratio and, and the increase in and decrease in, arc also dealt with.
    文中还将启闭机构设计中后箱板关闭的可靠性问题,以两个角速度比和的关系来表示,同时还对如何增大和减小进行了讨论。
  22. A practical optimization control system of ball mill pulverizing system with intermediate bin is introduced. This system includes steady state optimization control and start-stop optimization control of pulverized coal system.
    介绍一种实用的中储式球磨机制粉优化控制系统,此系统分为稳态优化控制和制粉系统启停优化控制。
  23. The start-stop control combined process control, regulation control and coordination control so as to realize complicated process control.
    系统启停控制将过程控制、调节控制、协调控制相结合,实现优化复杂系统过程控制。
  24. This paper introduces the application of field bus technology ( PROFIBUS) in start-stop shear electronic control system.
    介绍了PROFIBUS现场总线技术在起停式飞剪电控系统中的应用。
  25. The start-stop module to create and destroy the thread used to supervise light room and process image;
    启动停止模块建立和消亡用于监控光室状况和进行图像处理与分析的线程;
  26. The choice of foil metal and the application of surface treatment, the start-stop cycle and the durable performance of foil bearings were experimentally studied.
    对箔片式气体轴承箔片材料的选择、材料的表面处理方法以及该轴承的启停性能和稳定性进行了实验研究。
  27. In addition, the system through the method of combining software and hardware, starting and stopping control provides a hardware and software start-stop control of two control modes.
    此外,系统通过软硬件结合的方法,提供了硬件启停控制和软件启停控制两种控制模式。
  28. Meanwhile, this paper verifies the function of engine idling start-stop control system and the performance of controller IO response using the engine testing bench.
    同时,在发动机台架试验台上研究了该系统的怠速启停控制功能和控制器输入输出响应性能。
  29. Inverter have extensive application in industrial and mining enterprises because of the high precision, high efficiency, high power factors in speed regulation and start-stop performance and the importance of electricity-saving.
    由于变频调速器在调速和起制动性能,高精度、高效率、高功率因数和节电方面的重要作用,在工矿企业得到广泛的应用。
  30. Control software was included by the main program design and the design of the subprogram, the main program mainly to initialize the various function modules and realized the motor start-stop control.
    控制软件主要包括:主程序的设计和子程序的设计,主程序主要对各个功能模块初始化以及实现电机的起停控制。