subframe
英
美
网络 子框架; 子讯框; 个子帧; 子帧; 副梁
复数：subframes
双语例句
- Support the transmission with a wooden block on the chassis subframe.
用木块将变速箱支撑在底盘副车架上。 - Swivel the cardan shaft over the suspension subframe and install it.
将万向节轴旋转过悬架副车架并安装它。 - Concrete Mixers Subframe Failure Form and Improvement of Structure
混凝土搅拌运输车副梁失效形式和结构改进 - In such cases, the suspension subframe may be shifted slightly.
在这些情况中，悬架副车架可能稍微偏移。 - The Car Subframe Assembly Durability Adapting Rapid Development Research
汽车副车架总成的耐久性适应性开发研究 - The suspension subframe must be lowered.
必须放低支架副架。 - Support suspension subframe with a transmission jack.
用变速器千斤顶支撑支架副架。 - Included on this item are things like the page URL, subframe URLs, and form data.
关于这个项目包括像网页的网址，子窗体的网址，和表单数据。 - With the help of subframe protection technique, the actual system works continuously, stably and reliably.
利用孔径技术的子帧保护，应用于实际系统，能连续、稳定、可靠的工作。 - Causes of Subframe Crack and Middle Cross Beam Welding Seam Breakage and Method of Reinforcement
副车架开裂及中横梁焊缝断裂的原因和加固方法 - The subframe is the component of sedan car bearing body, and its 'construction and performance is very importance to packaging the engine and transmission well and improve carrying capacity with the condition of assembly part.
副车架是轿车承载式车身上的重要构件，其结构与性能对方便合理的安装发动机和动力传动系统，改善安装部位的承载条件至关重要。 - CCD Anti-Missed-Welding Inspection System for Buick Subframe
别克轿车副车架CCD防漏焊检测系统 - The main problems of LAS-CDMA system in the multi-cell construction also were analysed, and a new method to dynamically assign LA codes for each cell with different wireless subframe was proposed.
我们进一步分析了LAS-CDMA系统在组网上的主要问题，提出了给每个小区不同时间的无线子帧分配不同的LA码来实现动态组网的方法。 - Major frame and subframe are synchronized by using the combining method of hardware and software based on 8031 microprocessor.
它以8031单片机为基础采用硬件、软件相结合的方法实现主帧、副帧同步。 - Numerical modeling of pre-forming process design in hydroforming automobile subframe
汽车副架液压胀形预成形工艺设计的数值模拟 - In the paper 12 DOF powertrain_ subframe simulation model is set up and verified when it is optimized.
本文建立了12个自由度的轿车发动机动力总成副车架系统的仿真模型，并校验了模型的准确性。 - It hope that provide theoretical information and use for reference experiences for applying the hydroforming technology of automotive subframe on the industry of automotive components in China.
希望它能为汽车副车架的液压成形技术在我国汽车零部件开发行业的应用提供理论依据和经验借鉴。 - CAE Analysis of X Car Subframe Weld in g Assembly
X轿车副车架焊接总成CAE分析 - Fatigue life prediction of the subframe.
预测副车架疲劳寿命。 - And then the program for subframe, parity, user position and latitude and longitude transform modules and so on has been optimized on both algorithm and its implementation.
然后从算法和实现两方面对子帧同步，奇偶校验，用户位置解算，经纬度转化等子模块进行优化，加快了处理速度。 - Conventional approaches of precision code acquisition use coarse/ acquisition code to obtain the starting of next subframe in order to realize phase synchronization of precision code.
传统的P码捕获技术需利用C/A码得到下一子帧的起始时间，以完成P码相位的同步。 - The resources distribution among the nodes in a chain architecture network is done in the control access subframe under a daisy-chain rule.
在控制接入子帧的时隙内，网络中的节点以菊花链规则，环向的传递数据，完成网络资源的申请与分配过程。 - The time domain interference coordination technology adopts Almost Blank SubFrame ( ABS) scheme, including static ABS configuration schemes, as well as adaptive ABS ratio configuration scheme which is independently proposed in this paper.
时域干扰协调技术采用几乎空白子帧（ABS）方案，包括静态ABS配置方案以及本文自主提出的自适用ABS比例配置方案。 - The car design of the main place is: pull arm self-discharging device, subframe, linkage frame, hydraulic system and structure design, and the corresponding mechanics analysis and calculate.
本车设计的主要地方在于：拉臂式自卸装置、副车架、联动架、液压系统以及结构设计，并进行了相应力学分析计算。 - Static analysis structure of the subframe.
静态分析副车架的结构。 - The channel access TDMA frame is composed of control access subframe and data access subframe. Both the two subframe are divide into some time slots.
信道接入帧分为控制接入子帧和数据接入子帧。控制接入帧和数据接入帧都有若干个时隙组成。 - The channel response in pilot OFDM symbols is estimated by LS, MMSE algorithm, Basis expansion models are used to track the time-varying channel response in a subframe and the bit error rate, mean square error performances are simulated.
导频OFDM符号处信道响应使用LS，MMSE算法进行估计，一个子帧内的时域OFDM的时变信道响应使用基扩展进行信道拟合，仿真了系统误码率和信道响应均方误差。