sulfurization

网络  硫化作用; 硫化; 硫化反应

化学



双语例句

  1. Summary on sulfurization and operation of sulfur tolerant shift catalyst QCS-01
    QCS-01型耐硫变换催化剂硫化及运行总结
  2. Using methylene blue as the degradation object, the effects of sulfurization temperature, photocatalyst dosage and preparation method on the degradation rate of methylene blue were studied.
    以亚甲基蓝为目标降解物,考察了硫化温度、催化剂加入量和制备方法对亚甲基蓝降解率的影响。
  3. Influence of sulfurization temperature on optoelectric properties of Sn_xS_y thin films
    硫化温度对SnxSy薄膜光电性能的影响
  4. Test Research on Removal of Arsenic From Filtration Cake Containing Arsenic by Sulfurization
    硫化法从砷滤饼中分离砷的试验研究
  5. Influence of sulfurization of dispersed catalyst on slurry bed hydrocracking
    分散型催化剂的硫化对悬浮床加氢裂化反应的影响
  6. CuInS_2 films were grown by middle frequency AC magnetron sputtering and by sulfurization in sulfur-sublimed atmosphere.
    采用中频交流磁控溅射方法沉积Cu-In预制膜,并采用固态源蒸发硫化方法制备CuInS2薄膜。
  7. Proterozoic magmatism, sulfurization, and serpentinization are the main metallogenic ways of the nickel sulfide deposit.
    元古代岩浆作用、硫化作用和蛇纹石化作用是煎茶岭镍矿床主要的成矿作用方式;
  8. Preparation and Characterization of Red SrY_2S_4 ∶ Eu~ ( 2+) Phosphor via Carbonate Precursor and CS_2 Sulfurization
    碳酸盐前驱体和CS2硫化制备SrY2S4∶Eu~(2+)红色荧光粉及其表征
  9. The Pt-Sn catalyst sulfurized by ( NH 4) 2S can be used for catalytic dehydrogenation of paraffin. The results of laboratory researches showed that the sulfurization could enhance the stability and initial activity of catalysts.
    Pt-Sn催化剂经(NH4)2S硫化用于长链烷烃脱氢,实验室研究结果表明用(NH4)2S硫化不但可以提高催化剂的稳定性,而且也提高初活性。
  10. It is considered that the content of sulfurizing agent, drying temperature in impregnation, and sulfurization temperature and hydrogen pressure in sulfurization were main factors influencing activity of the catalyst.
    探讨了有机多硫化物在器外预硫化过程中影响催化剂活性的因素,认为浸渍液中硫化剂含量、干燥温度、硫化温度及氢压是影响催化剂活性的主要因素。
  11. The time of sulfurization is shorter, the temperature of bed layer is stable, and the activity of catalyst is high, while it is used for the sulfurization of Co-Mo catalysts.
    钴钼废催化剂综合利用研究进行钴钼系催化剂硫化,具有硫化时间短,床层温度平稳等特点,且催化剂可获更高活性。
  12. The phosphors SrS: Eu and CaS: Eu doped with Mn were prepared by sulfurization flux method ( SFM).
    采用硫化助熔剂法制备了SrS:Eu,Mn和CaS:Eu,Mn荧光粉。
  13. By increasing the sulfurizing agent usage in low temperature sulfurization stage, the reactions unfavorable to catalyst pre-sulfurization have been inhibited and sulfurization rate of the whole catalyst system increased.
    在低温硫化段采用增加硫化剂用量的方法,可以有效地防止不利于催化剂预硫化的反应发生,进而提高整个催化剂系统的上硫率。
  14. Ion sulfurization technologies and equipment are introduced from the patents and literatures, especially its progress and application in metallurgy and machinery fields.
    从专利、文献的角度分析了离子渗硫技术、设备在冶金、机械等领域的进展和应用情况。
  15. Analysis on Sulfurization Performance of Alumina Supported Copper Oxide sorbents by XRD
    XRD分析铝基铜吸附剂硫化性能
  16. XPS Study on Sulfurization Process of LaCoO_3 in the Presence of Oxygen
    氧存在下钙钛矿LaCoO3硫化过程的XPS研究
  17. Effectiveness of different dynamic sulfurization processes and sulfurization systems to the properties of polypropylene ( PP)/ ethylene-propylene diene copolymer ( EPDM) blends is compared.
    比较了不同的动态硫化工艺和硫化体系对聚丙烯(PP)/三元乙丙橡胶(EPDM)共混物性能的影响。
  18. XRD Analysis of the Sulfurization Property of Aluminum Supported Copper Oxide Sorbents
    应用X射线衍射仪分析铝基氧化铜吸附剂的硫化性能
  19. The practical examination in industrial scales demonstrated that the new sulfurization method has been characterized by excellent stability and selectivity of catalysts.
    经工业规模实际考核,表明这种新的硫化方法其催化剂稳定性好、选择性高、工业使用方便。
  20. Sulfurization Method of Pt-Sn Catalyst and Its Mechanism
    Pt-Sn催化剂的硫化方法及其机理
  21. Sulfurization kinetics of copper, nickel and iron with sulfur vapour at the temperature below 600 ℃
    铜镍铁与硫蒸气在600℃以下的硫化动力学
  22. The catalyst was characterized by XRD, XPS and IR techniques in order to study the stability and anti-sulfur ability on the processing of the 200 h HDS of thiophene and strengthening sulfurization.
    通过强化脱硫以及噻吩加氢脱硫反应考察了催化剂的稳定性和抗硫性能;并用XRD、XPS、IR等手段表征反应前后的催化剂。
  23. By comparison of above experimental results to those of the traditional H 2S sulfurization method, the author presented a new opinion about the mechanism of ( NH 4) 2S sulfurization.
    作者将实验结果与传统H2S硫化方法作了对比讨论,对(NH4)2S硫化的机理提出了新的看法。
  24. Hot state tests and analysis results show that DS01 absorbents have a stable sulfurization property;
    热态实验和测试分析表明,DS01型铝基氧化铜吸附剂硫化性能稳定;
  25. The structure and difficulties in machining multihole rubber ring sulfurization mould are analyzed. The manufacturing technology of multihole glue ring sulfurization mould and the technological-economic effects obtained are introduced.
    分析了多腔胶圈硫化模的结构及加工难点,重点介绍了多腔胶圈硫化模的设计制造工艺方法及获得的技术经济效果。
  26. Sulfurization technologies for hydrogenation catalysts and impact factors
    加氢催化剂硫化技术及影响硫化的因素
  27. So it is very important to study deeply its reducibility for understanding the sulfurization property of the sorbent.H2-TPR and CO-TPR of Fe-Mn mixed oxides sorbent were investigated in detail and compared with that of iron oxide and manganese oxide sorbent.
    深入研究脱硫剂的还原性能,对于进一步了解脱硫剂的硫化性能具有重要的意义。本文详细考察了Fe-Mn复合氧化物脱硫剂H2-TPR和CO-TPR还原行为,并与氧化铁和氧化锰脱硫剂的还原行为进行比较。
  28. The bare semi-product is treated with the coupling-agent, soaked in the silicon solution to overlay the film, followed by thermal sulfurization and surface treatment.
    半成品的裸体支架经过偶联剂处理后,浸入硅橡胶溶胶里覆涂膜,然后进行热硫化和表面处理。
  29. In this experiment, sulfurization was finished in only one step, and ball-milling played a crucial role in this reaction. Annealing time and temperature are also important for the products.
    研究结果表明此硫化过程为一步式反应,球磨对这一过程起到了重要的作用。