trunnion
英
美
网络 轴颈; 耳轴; 俯仰轴; 枢轴; 耳軸
复数：trunnions
COCA.46295
双语例句
- Other enhancements include trunnion mounting to eliminate side loads for prolonged seat life;
其他优点还包括轴颈安装消除侧面负载，延长阀座使用寿命； - Analysis the for nonperpendicularity between the trunnion and vertical axis, and nonperpendicularity between the trunnion and gun bore axis is also given. slanting or inclined in direction or course or position& neither parallel nor perpendicular nor right-angular.
并且对炮耳轴和竖直轴不垂直度，炮膛轴线和炮耳轴不垂直度进行了分析；有斜或坡形方向，路径或位置的&既不平行也不垂直也无直角的。 - The results show that the maximal stress appears in the fillet which connects the feeding cover and the trunnion, and the minimal stress appears in the middle of the cylinder body.
计算结果表明：左端盖与中空轴的过渡处应力最大，筒体中部应力最小。 - The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
耳轴组件的支承是每根臂末端的空气轴承，轴承上的闸瓦起定位作用。 - The trunnion sprocket has come off the pinion, but do not worry-we'll soon but that right.
耳轴链齿脱离齿轮，不过不要紧&我们马上可以修好。 - The load and air cylinder can swing round the pin in a plan, if the stroke is long, adopt the intermediate fixed or movable trunnion type.
负载和气缸可绕铰轴在一个平面内摆动，气缸长行程时，建议采用中间铰轴式。 - Pressure-compensated air bearings are used on both ends of the trunnion axis.
耳轴两端各用一压力补偿空气轴承。 - Handling and transport design of converter trunnion for Panzhihua isc.
攀钢转炉耳轴的装运设计。 - Reasons Analysis and Maintenance Measures for the Failture of Converter Trunnion Bearing
转炉耳轴轴承的故障分析和维护措施 - FEM analysis of the converter trunnion ring based on ANSYS
基于ANSYS转炉托圈的机械应力及模态分析 - Trunnion bascule bridges are doubtless one of the renowned bridge types in Chicago.
耳轴开合桥是芝加哥最出名的桥的种类之一。 - In general, WILLIAMSONs trunnion ball valve features the front ball sealing design structure.
威廉姆森固定球阀一般采用球前阀座密封结构。 - The contact pair elements between the saddle pedestal and the bearing bushing, as well as between the bearing lining and the trunnion were taken as the boundary conditions in the numerical simulation.
将鞍形座与轴承衬体、轴瓦与中空轴之间建立接触单元作为数值模拟的边界条件； - Reduced trunnion drag and energy waste because the trunnions on the VR Taper bucket are positioned on the rear taper effectively reducing the area of the trunnion exposed directly to soil flow.
由于VR锥形铲斗的耳轴是在铲斗的锥形后部，有效地缩小了耳轴直接接触货流的面积从而减少耳轴牵拉和能量消耗。 - A pin or gudgeon, especially either of two small cylindrical projections on a cannon forming an axis on which it pivots. analysis the for nonperpendicularity between the trunnion and vertical axis, and nonperpendicularity between the trunnion and gun bore axis is also given.
炮耳轴或耳轴，尤指炮两边形成旋转中轴的两个圆柱形小突起并且对炮耳轴和竖直轴不垂直度，炮膛轴线和炮耳轴不垂直度进行了分析； - The unique part of the mounting is the trunnion.
独特的部分是耳轴安装。 - Making Technology Analysis of 120t Converter Trunnion Ring
120t转炉托圈制造工艺分析 - The paper analysis the trunnion abrasion. The quality of repair is calculated by the verifying intensity.
对梅山炼铁厂100t铁水罐的耳轴磨损进行了分析，通过耳轴弯曲强度核算，确认需要修复磨损量。 - Fitting up and welding technology of steelmaking converter trunnion ring
炼钢托圈的组对及焊接工艺 - The article briefly introduces the centre drive technology with transducer lower trunnion for Ljungstrom air preheater.
简单介绍了空气预热器下轴中心变频驱动技术。 - The existence of corrosion inhibitor ( NaNO_2) prevents the material of gun bore from corrosion. analysis the for nonperpendicularity between the trunnion and vertical axis, and nonperpendicularity between the trunnion and gun bore axis is also given.
缓蚀剂（NaNO2）的存在可以使炮管材料不发生腐蚀。并且对炮耳轴和竖直轴不垂直度，炮膛轴线和炮耳轴不垂直度进行了分析； - And we analyzed the effect of the big gun erect axis incline trunnion axis is out of the vertical of the erect axis and the big gun axis is out of the vertical of the erect axis to measuring accuracy.
对矢量转轴公式进行了推导，并利用它计算出了火炮竖轴倾斜、炮耳轴与竖轴不垂直、炮膛轴线和炮耳轴不垂直三种误差对测量精度的影响。 - A method of determining the sight line offset and its causes with-out adjusting the trunnion is suggested.
提出了一个不必调整炮耳轴水平而测定瞄准线偏移及其原因的方法。 - The Intensity Analyse and Repairing of 100t Hot Metal Ladle Trunnion
100t铁水罐耳轴强度分析与修复 - The flexible connecting bolts are important fastenings connecting the DEMAG converter shell with its trunnion ring.
柔性螺栓是DEMAG公司制造的某炼钢厂转炉中连接托圈和炉壳的非常重要的联结装置。 - Linkage Design of Trunnion and Suspension Gear of Modern Converter
现代转炉的耳轴与悬挂齿轮联接设计 - Analysis of cracks formed in the trunnion ring of converters in steel making plants and the reconstructive measures
炼钢厂转炉托圈裂纹产生原因分析及改造措施 - The article analyses the factors of the converter body deformation, the new converter body manufacturing process, the replacement of converter body and trunnion bearing, and the technological bottleneck& characteristics of the replaced converter body as well.
文章分析了炉体变形因素，讨论了新炉体的制作情况和炉体、耳轴更新工艺，并就炉体更新的技术关键及特点作了分析。 - Vertical right angle observation analysis the for nonperpendicularity between the trunnion and vertical axis, and nonperpendicularity between the trunnion and gun bore axis is also given.
竖直角观测并且对炮耳轴和竖直轴不垂直度，炮膛轴线和炮耳轴不垂直度进行了分析； - The data of rotary swing of converter trunnion, reducer deflection and interstice of torsion-bar retaining device are discussed, which provide a reference base to the application of tilting equipment in the plant.
验算了转炉托圈耳轴回转摆动、减速机偏摆、扭力杆止动装置间隙的数值，以期为转炉倾动装置的使用提供实践参考。