welders
英 [ˈwɛldəz]
美 [ˈwɛldərz]
n. 焊工
welder的复数
柯林斯词典
- 焊接工
A welder is a person whose job is welding metal.
双语例句
- The Contractor shall have all welders tested in accordance with the applicable code or standard.
承包商应根据适用规范或标准测试所有焊工； - All welding shall be performed only by welders certified in accordance with the specifications.
只能由经规范认证的焊接工进行各种焊接操作。 - Welding procedures and welders shall be qualified in accordance with the specified code or standard.
焊接程序及焊工应符合指定的规范或标准的要求。 - Fibrosis of the lung caused by iron dust; occurs among welders and other metal workers.
由于铁屑而导致的肺纤维变性；发生在焊工或金属工人。 - Objective To investigate the status of health in the welders.
目的调查电焊工人的职业健康状况。 - We had some unexpected problems with our new robotic welders in the factories, which led to production snags.
我们工厂里的新自动焊接机发生了未能预料到的问题，从而导致生产的障碍。 - Welders should be trained according to prescribe by the state authority, and mastering proper techniques of welding, only with special type of certificates then can be allowed to work formally.
焊工必须按国家有关规定经专门的安全作业培训，掌握焊割安全技术，取得特种作业资格后，方可上岗操作。 - Investigation on the Knowledge of Occupational Disease Prevention and Control among Welders of Mechanical Industry in Qingdao City in 2009
2009年青岛市机械制造业电焊工职业病防治知识调查 - Some areas of the tables may not apply to resistance spot welders in the KVA ratings available from this company.
在这家公司提供的千伏安级别表格的一些部分可能不适用于接触点焊机。 - Use heat as required, in various degrees, from heat guns, soldering irons, torches and welders.
根据不同的使用温度需要使用加热工具，从热枪，烙铁，打火机和焊工。 - Arcs more readily than AC welders, with longer arcing.
起弧比交流电容易，电弧加长一倍。 - His job was to roll angle iron onto a conveyor so that the welders farther up the production line would have it to complete their job.
他的工作是把有棱角的铁滚到搬运台上，这样焊接工才能作进一步加工来完成整个工序。 - Make available qualification tests of welders and qualification records of the NDE personnel to the Engineer upon request.
对焊工进行有效的资质测试，并且满足NDE对工程师个人要求的技术合格证书。 - The multipurpose welders in the series can be operated for MMA, DC TIG welding processes.
本系列焊机。具有手工弧焊，直流TIG焊两种功能。 - UNQ butt welders can be connected to the straightway and ball joints of low-carbon steel, copper and aluminum, and are widely used to weld rings.
系列对焊机能对接低碳钢、铜、铝等金属的直线或环形接头，广泛应用于焊圈行业。 - 'In the U.S., it's welders, in France, it's cooks and chefs, and in Norway, it's butchers.'
在美国，短缺的是焊接工，法国是厨师和大厨，而挪威是屠夫。 - DN3 spot welder with similar structure to DN1 has quite large electrode force and is used to make those spot welders with larger power for wider uses.
DN1系列点焊机结构相类似，但其电极压力大，故可制作较大功率的点焊机，适应范围更广。 - ZIEC employs a few Algerian welders, steel drivers or carpenters at 680 dinars a day.
中鼎国际以每天680第纳尔的薪水聘用了一些阿尔及利亚的焊工、抡大锤的人和木匠。 - Effects of Heavy Metals Exposure on Oxidative Stress in Welders
焊工体内重金属负荷与氧化应激损伤 - All the structures shall be welded by welders or bolted on-site.
全部采用工厂焊接，现场栓接，方便施工。 - Assist supervisor to organize technique and safety training for the welders;
协助主管做好对焊工的技术和安全培训； - The study tested manganese oxide ultrafine particles at a concentration typically inhaled by factory welders.
研究中按照电焊工人工作环境中氧化锰超细颗粒的浓度做了相应的测验。 - Welding operations are performed by appropriately qualified welders.
焊接操作由具有资质的焊工实施。 - Welders help build metal products from coffeepots to skyscrapers.
焊工加工的金属品从咖啡壶到到摩天大楼而不等； - Case control study on risk factors of pneumoconiosis in welders
电焊工尘肺危险因素的病例对照研究 - Welders and machinists have more than enough skills to be robot technicians, says Prof Bourne.
焊工与机修工有足够技能成为机器人技师，伯恩教授说。 - Only apply MIG welds on the side member using the welders approved in the workshop equipment manual.
只能使用《车间设备手册》中认可的焊机对侧梁执行mig焊接。 - Welds made by unqualified welders shall be rejected and shall be completely removed by the contractor.
承包商应拒绝不合格焊工制备的焊缝，并彻底清除。 - But not all welders have the desire or the wherewithal to learn [ robotics], he says.
但并非所有的焊工都有强烈的意愿或者必要本事来学习机器人技术。他说。 - Weld procedure specification and qualification records and welders qualification record.
焊接程序规范及资质记录，以及焊工的资质记录。