veneering

1. Continuous cycle hot plate veneering press
   连续循环式热平板单板压机
2. Study of the color compatibility between the new type zirconia base and vitadur alpha veneering porcelain;
   本论文主要是探讨现代首饰的新品种&陶瓷首饰在装饰性方面的设计与制作。
3. By the mid-19th century mechanical saws allowed the veneering process to be used in mass production to cover defects in cheap furniture.
   19世纪中期随着电锯的使用，采用薄片镶饰的方法，以掩饰廉价家具的缺点。
4. European Federation of the Wood Veneering Industry
   欧洲木制品镶饰工业联合会
5. Every kinds of veneering are various capacity, you can choose freely.
   每种贴面均有大小不同容量，诸君可灵活选购。
6. Study on the compatibility of yttria-stabilized zirconia framework bonded to the corresponding veneering ceramic
   钇稳定氧化锆基底材料与饰面瓷结合性能的实验研究
7. As a small slice cutter for beauty, the table-type hay cutter can cut the fruits and carrots and the like into the slices with the thickness like that of a piece of paper for veneering.
   作为美容用的小型切片刀，可切出薄如纸的瓜果片、胡萝卜片等供贴面使用。
8. The wood of an African obeche tree; used especially for veneering.
   非洲白木的木料，尤其用于装饰。
9. The bulges in veneering are mainly caused by the factors such as uneven surface, drying speed of glue, moisture content of veneer.
   分析了薄木贴面工艺中，木皮起泡主要是由于表面不平、胶水固化程度和薄木含水率等原因所致。
10. By analyzing the different conditions in each period of veneering, the methods of how to mend bulges were given.
    并对各个阶段出现起泡的具体情况进行分析，给出处理方法。
11. Influence of veneering porcelain on the color of dental infiltration alumina core ceramic and veneering porcelain complex
    饰面瓷对玻璃渗透氧化铝陶瓷-饰面瓷复合材料颜色的影响
12. AN EXPERIMENT ON INARCHING BY INLAYING A STALK ON ROOT PRUNING STALK OF CUCUMBER Study on Veneering with Two-Solution Adhesives
    黄瓜砧木断根靠接法试验研究两液胶薄木饰面工艺初探
13. Effect of repeated firings on the color stability of dental computer aided design/ computer aided manufacture infiltration alumina core ceramic and veneering porcelain complex
    烧结次数对计算机辅助设计制作渗透铝瓷-饰面瓷复合材料颜色稳定性的影响
14. Taking a project as the example, this paper briefly introduces construction preparation, technical process, technical organization and quality control of veneering enamelled bricks on tall building's exposed wall with large area.
    以某工程为例，简要介绍了高层建筑外墙大面积釉面砖粘贴的施工准备、施工工艺流程、施工技术组织措施及质量控制措施。
15. In this study, using an all-ceramic core material ( MIC), we investigate the change of strength caused by sandblast under different grain size, pressure and time. We also research the strength change of MIC sintering with its veneering porcelain that has been sandblasted before.
    本研究选用全瓷修复底层材料（MIC），通过改变喷砂的粒度、压力和时间，研究喷砂对其强度的影响，并对喷砂后的试件进行饰面瓷烧结，测量其强度的改变。
16. Thermal match of a high-strength core material for all ceramic bridge with its veneering porcelain
    一种全瓷桥核型材料与饰面瓷的热匹配性研究
17. To make it practicable in clinic, the VITA veneering porcelain were applied to solve the color reproduction of this new style zirconia.
    为使该材料尽快应用于临床，拟应用已商品化的饰瓷解决其颜色再现问题。
18. An investigation has been made on veneering with two-solution adhesives consisting of urea formaldehyde resin adhesive and polyvinyl acetate resin adhesive.
    本文探讨了用脲醛树脂胶与聚醋酸乙烯酯乳液组成的两液胶薄木饰面工艺。
19. Objective: To evaluate the color change of the two-layer porcelain laminate veneer after adding veneering porcelain of different thickness to the 0. 2 mm thick aluminum oxide.
    目的：考察加入不同厚度的饰面瓷在0.2mm氧化铝上双层烤瓷贴面颜色的变化。
20. AIM: To assay the influence of repeated firings on the color stability of the glass infiltration alumina core ceramic and veneering porcelain complex and to provide experimental basis for clinical application.
    目的：测定烧结次数对渗透铝瓷-饰面瓷复合材料颜色稳定性的影响，为临床实际应用提供实验依据。
21. Objective To investigate the interface bond strength and compatibility between High-Strength Dental Ceramic ( type A) and Vintage AL veneering porcelain.
    目的考察高强度牙科陶瓷（A型）与松风VintageAL饰面瓷之间的界面结合及匹配性，为其临床应用奠定基础。
22. Veneering Enamelled Bricks on Tall Building's Exposed Wall with Large Area
    高层建筑外墙大面积釉面砖的粘贴
23. The technique of hot-pressed veneering ceramic was recommended to be used on the surfaces of zirconia and metal core crowns, to reduce the inner defects of veneering ceramics and to improve process efficiency. 3.
    临床上氧化锆、金属合金内冠表面可使用热压铸饰瓷工艺，既降低饰瓷材料缺陷，又提高饰瓷工艺效率。
24. The mainly failure reasons were: veneering chipping and delamination, secondary caries and so on.
    主要失败原因有：饰瓷剥脱、修复体边缘的继发龋的发生等。
25. This paper makes an experiment study on veneering technique and dimensional stability of the panels.
    本文针对稻草板无醛家具制造技术中板件的贴面技术和尺寸稳定性进行实验研究。
26. By a single factor test and orthogonal test, the paper takes bamboo timber and Taun as base material to study on the clear decorate process of melamine, using 3 different process: painting melamine, veneering melamine impregnated paper, mixing of painting and veneering.
    本论文通过单因素试验和正交试验，分别采用涂饰法、浸渍纸贴面法、涂饰与浸渍纸贴面复合法，以竹集成材和番龙眼木材为基材表面的三聚氰胺树脂透明装饰工艺进行了研究。

noun

1. the act of applying veneer

2. coating consisting of a thin layer of superior wood glued to a base of inferior wood

   Synonym:    veneer