spindle

noun

1. 轴；心轴；指轴
   a long straight part that turns in a machine, or that another part of the machine turns around
2. （手纺用的）绕线杆，纺锤
   a thin pointed piece of wood used for spinning wool into thread by hand

1. (机器的)轴，心轴
   A spindle is a rod in a machine, around which another part of the machine turns.
2. (手纺用的)绕线杆
   A spindle is a pointed rod which you use when you are spinning wool by hand. You twist the wool with the spindle to make it into a thread.

1. Motorized spindle is a high speed spindle component; it is inevitable choice of high speed machining.
   电主轴是一种高速的主轴部件单元，它是高速加工技术发展的必然性选择。
2. Analysis and Experimental Study on Dynamic Characteristics of CNC Lathe Spindle System
   数控车床主轴系统动态特性分析与试验研究
3. Excessive spindle speed and higher drafts.
   锭速过高和高牵伸。
4. Study Analysis on Spindle System and the Characteristic of the Bed of High Speed Milling Machine
   高速铣床主轴系统和床身特性的分析与研究
5. The wheels swivel on each end via a pivot arrangement between the axle and the wheel spindle.
   通过装在轮轴和车桥之间的驱动轴，两端的车轮可以转动。
6. The cage is connected by a spindle to the torque spring and pointer.
   用销子将其骨架结构与转矩弹簧和指针连接。
7. Test conditions for horizontal spindle turret and single spindle automatic lathes.
   卧式轴六角自动车床和卧式单轴自动车床的试验条件。
8. Cortical polarity determines spindle orientation and position.
   皮层极性决定主轴方向和位置。
9. Dynamic performance of a ceramic bearing spindle unit is studied in this paper.
   对陶瓷轴承主轴单元的动态性能特点进行了实验研究。
10. The objective of this research is to model and forecast the temperature of motorized spindle by on-line infrared thermometer.
    文章采用红外测温的方法对电主轴进行在线检测，建立温度模型，对电主轴温升及其故障进行预测和报警。
11. The high-accurate electric spindle ensures uniform speed of spindle and independent operation.
    高精度的电锭，保证锭子转速均匀和操作的独立性。
12. It controls spindle motor rotation and heads movements.
    它控制主轴马达转动和磁头运动。
13. Solved with the spindle sleeve and bearing components with the layout of the form of the key technical problems.
    解决了套筒与主轴的配合及支承部件的布置形式等关键技术问题。
14. D1-11 spindle is supported by high quality tapered roller bearing.
    素D1-11主轴是支持高品质圆锥滚子轴承。
15. Study on Heat Characteristics of Spindle Bearings and Influences on Speed and Dynamics
    主轴轴承热特性及对速度和动力学性能影响的研究
16. Hot-stability Analysis Method for Rotor Forging and Principal Spindle of Steam Turbine
    汽轮机主轴和转子锻件热稳定性分析方法研究
17. ROD encoders are coupled to the drive or the spindle via a separate rotor coupling.
    杆编码器耦合到驱动器或通过单独的转子耦合主轴。
18. Spindle support on ceramic balls bearings at oblique contact for high speed.
    为确保高速，采用陶瓷滚珠轴承与主轴斜向接触。
19. The spindle system is high in rigidity accuracy.
    主轴系统的刚性精度高。
20. In these cells, one's attention is drawn to the spindle pole, its nature, and function.
    在这些细胞中，纺锤极的性质和功能是值得注意的。
21. In addition to the strength and rigidity, the dynamic properties of machine tool spindle should be considered.
    机床主轴的设计除了要考虑其强度和刚度外，尚须考虑其动态特性。
22. AXLE: Rod or spindle on, or with which a wheel revolves;
    轮轴：指带轮子可以旋转的杆或轴；
23. The turning accuracy of machine tool spindle and grinding process system are also analyzed in the paper to guarantee the grinding accuracy and cutting accuracy of the whole machine material.
    为了保证磨削精度和整机试料切削精度，本文还对主轴回转精度及磨削工艺系统进行了分析和探讨。
24. Hydraulic double-chuck spindle veneer lathe Wood cuttings and sawdust can be compressed into boards.
    液压双卡轴木旋切机木屑和锯末可压制成板。
25. General Machine concentrated in the main gear box and gearbox in the spindle.
    一般机床的齿轮主要集中在主轴箱和变速箱中。
26. Retrofit and strengthen the open spindle on H-6000 Crusher is introduced when electric brush plating technology is used.
    介绍了电刷镀技术在修复和强化H-6000型破碎机锥开轴的方法。
27. This machine has two kinds of common, spindle box combination machine tools and turn tower combination machine tools.
    这类机床常见的有两种，可换主轴箱式组合机床和转塔式组合机床。
28. Only two parameters can be modified during the real-time control process: feedrate and spindle speed.
    只有两个参数可以修改，在实时控制过程：进给速度和主轴转速。
29. High-speed motorized spindle Magnetic flux Frequency control Torque control Dynamic response;
    高速电主轴；磁通；变频调速；转矩控制；动态响应；
30. SPINDLE HEAD: Part of a machine, which supports and drives the grinding wheel.
    心轴顶端：设备的一部分，用于支撑和驱动磨削轮。

noun

1. any holding device consisting of a rigid, sharp-pointed object
   1. the spike pierced the receipts and held them in order

   Synonym:    spike

2. a stick or pin used to twist the yarn in spinning

3. any of various rotating shafts that serve as axes for larger rotating parts

   Synonym:    mandrelmandrilarbor

4. a piece of wood that has been turned on a lathe

5. (biology) tiny fibers that are seen in cell division
   1. chromosomes are distributed by spindles in mitosis and meiosis